Chemforce Oxitec M Cleaner

In-Stock

Request a Quote

Description

ADVANCED, READY-TO-USE, ENVIRONMENTALLY RESPONSIBLE OXYGEN CLEANER FOR NATURAL STONE, MASONRY, TILE, CONCRETE AND GROUT

Oxitec-M™ is specially formulated to provide an effective, safer alternative to chlorine-based products for removing organic dirt, grime, pollution, mould and stains from uncoated surfaces

Product Technical Benefits

Ready-to-use formulation.
Zero odour, advanced oxygen-based technology.
Penetrates deeply to kill mould inside the pores
Foaming action lifts and suspends dirt for easy rinse off.
Mildly alkaline formula will not harm stone and masonry materials
Buffered technology provides a longer dwell time for breaking down dirt and stains.

Product Applications

Commonly used for cleaning driveways, patios, entertaining areas, walls, floors, tiles, paving, retaining walls.
For exterior use on uncoated (non-painted) surfaces, including: Natural stone, concrete, brick, stone, terracotta, grout and wood.
Ideal for safe cleaning and restoration of historic buildings, monuments, tombstones and sculptures.

How to Use

ALWAYS TEST PRODUCT ON A SMALL, INCONSPICUOUS AREA FIRST.
Wet very porous surfaces first with clean water.
Saturate the surface with Oxitec-M™ (do not dilute) using pump sprayer, watering can etc.
Leave for 10 minutes, then agitate surface with a hard bristle brush, scrubbing pad, deck scrubber etc
Repeat step 4 if necessary
Rinse the surface thoroughly with clean water. A high-pressure hose will help.
Full brightening effect can take 24 hours or more as the surface dries fully.
Replace the cap on the container immediately after pouring. Do NOT return unused material to the container.

Precautions

Do not handle until all safety precautions have been read and understood.
Wash thoroughly after handling. • Avoid release to the environment. • Wear protective gloves/protective clothing/eye protection/face protection.
IF ON SKIN: Wash with plenty of soap and water. • IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Specific treatment is advised – see first aid instructions. • If skin or eye irritation occurs: Get medical advice/ attention. • Take off contaminated clothing and wash before re-use.